And here's a list of stuff done in the last 4 months:
1. PASSENGER FRONT QUARTER CHASSIS, NEXT TO MEMBER (CAB FLOOR)
2. HORN IS INTIMMITENT, METAL FIXING BRACKET TO BE WELDED ON
3. PASSENGER SIDE CAB FLOOR AND STEP WELDING
4. RUB AXLE BEAM DOWN AND UNDERSEAL. INVESTIGATE IF A GREASE NIPPLE IS MISSING, IF SO REPAIR/REPLACE
5. REVERSE/UNDERSIDE OF BUMPER BULGE PANEL (WHERE PREVIOUS WELDING IS WEAKENING ALONG THE JOIN)
6. 2 FRONT WHEEL ARCHES (EXTERNAL) PANELS TO BE WELDED ON
7. ACCELERATOR PEDAL ASSEMBLY- CAB FLOOR REPAIR- WELD
8. REPLACE COMPLETE DRIVERS SIDE DOOR COMPLETE WITH FIXINGS
9. PASSENGER CAB AREA FLOOR AND SIDE STEP
10. REAR EDGE OF INNER SILL (REPAIR A PREVIOUS PATCH BY REPLACING WITH NEW METAL)
11. INVESTIGATE AND RENEW ALL WHEEL BEARINGS IF NECCESSASRY
12. BATTERY TRAY LOCATION (LEFT AND RIDE SIDE),
13. ATTACH BATTERY MOUNTING
14. PASSENGER COMPLETE INNER AND OUTER SILL REPAIR
15. CLUTCH CABLE- MAKE A BRACKET TO HOLD AND REMOVE CABLE TIE
16. REAR AXLE (TUBE TO CHASSIS LEG) PASSENGER AND DRIVERS SIDE (THROUGH CHASSIS RAIL)
17. REAR ‘MUDFLAP’ AREA (SPLASH GUARD), PASSENGER AND DRIVER SIDE, WELD AND SECURE TO WING
18. REAR QUARTER TO FLOOR (LET PATCH IN) PASSENGER SIDE
19. REAR FLOOR SECTION TO BATTERY TRAY DRIVERS SIDE
20. REAR QUARTER OUTER PANEL (LEADING BACK TO BUMPER)
21. WELD AND GRIND DOWN METAL TO WHERE FIBREGLASS FILLER IS USED NEAR SWAGE LINE ON BACK END
22. REAR OUTER SILL PASSENGER SIDE (OUTER SECTION)
23. SMALL TRIANGULAR SHAPED WELD TO PANEL WHICH WOULD HAVE BEEN DRIVERS SIDE SLIDING DOOR (BOTTOM LEFT)
24. PLATE TO BASE OF B PILLAR, DRIVERS SIDE
25. SUSPECTED METAL WIRE COVER RUNNING THE LENGTH OF THE CHASSIS, REPLACE WITH NEW METAL
26. REAR OF DRIVERS SIDE SEAT PANEL, TO THE CARGO FLOOR, REPLACE WITH SIMILAR PANEL TO REPAIR ALREADY DONE ON PASSENGER SIDE (APPROX 10”)
27. GET SLIDING DOOR TO WORK AND ENSURE A SMOOTH MECHANISM, REPLACE ANY RUST AND RUNNER OBSTRUCTIONS. PAYING PARTICULAR ATTENTION TO DOOR RUNNER RAIL (INTERNAL & EXTERNAL- which needs welding)
28. REPLACE HOLED INSIDE SLIDING RAIL PANEL
29. PLATE TO REAR QUARTER INNER DRIVERS SIDE (INTERNAL) NEAR REAR SEAT LOCATION
31. ENGINE BAY- BATTERY LOCATIONS ON BOTH SIDES, REPLACE WITH NEW PANELS
32. DRIVERS SIDE REAR CORNER (ALONG SWAGE LINE LEADING TO ROOF GUTTER), NEAR TO WHERE THE HINGE IS ON THE TAILGATE DOOR. (REPLACE WITH PATCH)
33. REAR TAIL GATE, BLOB AND WELD SMALL HOLES
34. NEW OUTER SKIN TO DRIVERS SIDE, NEW SMALL PANEL REPAIR TO SAME ON PASSENGERS SIDE
35. NEW SLIDING DOOR BOTTOM
36. NEW WINDSCREEN AND FRONT PANEL
37. BEAM ADJUSTERS (CREATIVE ENGINEERING BIG TEETH ONES)
..... ETC ETC.
pROBABLY MISSED A LOAD OFF, BUT THATS THE BULK OF IT.
Home 
