http://blitzen.editboard.com/technical-q-a-f4/-t1.htm A problem shared is another life ruined. Sun, 22 Nov 2009 19:55:12 GMT 10 http://www.splum.plus.com/DBS/FORUM/IMAGES/forum.gif http://blitzen.editboard.com/technical-q-a-f4/-t1.htm http://blitzen.editboard.com/technical-q-a-f4/bleeding-a-diesel-t9421.htm dubberatlast If thats the prob, I changed the diesel filter, blew through the fuel lines and sorted the breaking down, ever since its had another prob. When you start the van it runs lumpy like its running on 3, and smokes like fook, bring the revs up and it clears, let the revs drop and it does it again until warm then its all fine Is this air in the system or am i selling the fooking heap??? Technical Q/A Sat, 07 Nov 2009 16:49:53 GMT http://blitzen.editboard.com/technical-q-a-f4/bleeding-a-diesel-t9421.htm#121815 http://blitzen.editboard.com/technical-q-a-f4/bleeding-a-diesel-t9421.htm http://blitzen.editboard.com/technical-q-a-f4/is-this-welder-any-good-t9565.htm WizBizMartin
http://www.machinemart.co.uk/shop/product/details/110e-mig-welder/path/diy-mig-welders


cheers guys]]> Technical Q/A Sun, 22 Nov 2009 19:55:12 GMT http://blitzen.editboard.com/technical-q-a-f4/is-this-welder-any-good-t9565.htm#123396 http://blitzen.editboard.com/technical-q-a-f4/is-this-welder-any-good-t9565.htm http://blitzen.editboard.com/technical-q-a-f4/how-many-miles-t9564.htm dubberatlast
i cant remember lol]]> Technical Q/A Sun, 22 Nov 2009 19:27:55 GMT http://blitzen.editboard.com/technical-q-a-f4/how-many-miles-t9564.htm#123391 http://blitzen.editboard.com/technical-q-a-f4/how-many-miles-t9564.htm http://blitzen.editboard.com/technical-q-a-f4/rear-spring-plate-removal-t9549.htm WizBizMartin want to take these of and replace them for ajustable springs plates, but are the spring plates when on the car spring loaded or under tension when the cars jacked up in anyway ? mite sound starnge just something i heard about them properly wrong, so basically if remove the spring plate from will it like try to unwind inside the torsion tube, ? or just the they just slide of the torsion bar and slide back on , http://www.machine7.com/section.php?xSec=1632 this is wht im on bout, lol Technical Q/A Fri, 20 Nov 2009 20:18:00 GMT http://blitzen.editboard.com/technical-q-a-f4/rear-spring-plate-removal-t9549.htm#123217 http://blitzen.editboard.com/technical-q-a-f4/rear-spring-plate-removal-t9549.htm http://blitzen.editboard.com/technical-q-a-f4/welders-and-welding-gas-t9552.htm Bmtt4 After getting pi$$ed right off with me mates Sip migmate that is pure crap im thinking about getting this http://www.machinemart.co.uk/shop/product/details/mig160tm-welder/path/automotiveindustrial-mig-welders What do people think i belive that its ment to be a pretty good welder for the price. also where do people get there gas from and what is the rough price im looking at? Technical Q/A Sat, 21 Nov 2009 10:21:08 GMT http://blitzen.editboard.com/technical-q-a-f4/welders-and-welding-gas-t9552.htm#123253 http://blitzen.editboard.com/technical-q-a-f4/welders-and-welding-gas-t9552.htm http://blitzen.editboard.com/technical-q-a-f4/baywindow-splitty-hubcap-question-t9480.htm Sir.Swish
Will bay window and late bug hubcaps fit onto splitty/early bug hubcap "wide 5" rivet-on clips?]]> Technical Q/A Fri, 13 Nov 2009 16:22:49 GMT http://blitzen.editboard.com/technical-q-a-f4/baywindow-splitty-hubcap-question-t9480.htm#122436 http://blitzen.editboard.com/technical-q-a-f4/baywindow-splitty-hubcap-question-t9480.htm http://blitzen.editboard.com/technical-q-a-f4/chassis-number-question-t9456.htm Impy Mcdub im thinkin of sending off for a vw birth certificate for the bay......im not really interested in its history....im just a tight arse whoi wants free tax! but before i part with me folding & let the moths escape my wallet, im concerned my van is slightly too late build date wise to be tax exempt.....she was registered 6th March 1973.......bout 9wks after the deadline........im wondering on the build to import & registration time period??? anyone on here got a very late 72 ... Technical Q/A Tue, 10 Nov 2009 20:48:40 GMT http://blitzen.editboard.com/technical-q-a-f4/chassis-number-question-t9456.htm#122194 http://blitzen.editboard.com/technical-q-a-f4/chassis-number-question-t9456.htm http://blitzen.editboard.com/technical-q-a-f4/73-bay-wiringhelpmore-help-required-t9394.htm Impy Mcdub am havin a hell of a job with the bay gettin it to start...........basically the wirings been cut about to take a period motometer ammeter (anyone wanna buy that), some stereo at some point, a temp gauge for the engine & split charge wiring. anyone on here got a wiring diagram for the starter/ignition/key circuits?? im gutting the added looms n such as i go but need a standard reference point to reconnect all the original wiring.............starter solenoid clicks at the mo with ... Technical Q/A Wed, 04 Nov 2009 11:05:08 GMT http://blitzen.editboard.com/technical-q-a-f4/73-bay-wiringhelpmore-help-required-t9394.htm#121508 http://blitzen.editboard.com/technical-q-a-f4/73-bay-wiringhelpmore-help-required-t9394.htm http://blitzen.editboard.com/technical-q-a-f4/fooking-pissed-t9330.htm dubberatlast Had a great night out, hungry horse for a meal then onto the vue to watch saw6 (shit). got in the van and it just turned over, 30 secs finally fired, strange as always goes first flick, get on the m5 and balls out foot to floor 60mph, got to a hill and 40mph. Got of m5 at weston and it cuts out totally, 30 secs later and it fires again but this time 45mph flat out, suspect diesel filter blocked again, get to western mcds and takes the filter of as it died again, nothing wrong there. put ... Technical Q/A Thu, 29 Oct 2009 01:30:37 GMT http://blitzen.editboard.com/technical-q-a-f4/fooking-pissed-t9330.htm#120889 http://blitzen.editboard.com/technical-q-a-f4/fooking-pissed-t9330.htm http://blitzen.editboard.com/technical-q-a-f4/ride-height-t8345.htm Meester Teem My new insurance company, Sureterm, want to know exactly how far my van has been lowered. As the wack with the lowering stick took place just before I bought the van, I don't know exactly how far. I just know that it fits in my garage. So, I wondered if one of you kind owners of a completely stock ride height bay window could answer the following question.... What's the distance between the horizontal center-line of one front wheel and the bottom edge of the wheel arch lip directly ... Technical Q/A Fri, 31 Jul 2009 14:49:33 GMT http://blitzen.editboard.com/technical-q-a-f4/ride-height-t8345.htm#109702 http://blitzen.editboard.com/technical-q-a-f4/ride-height-t8345.htm http://blitzen.editboard.com/technical-q-a-f4/hub-re-drilling-t9243.htm clockwork
So where can I get my hubs re-drilled and how much is this gonna cost?

Any suggestions/ideas appreciated

Si]]> Technical Q/A Wed, 21 Oct 2009 18:20:18 GMT http://blitzen.editboard.com/technical-q-a-f4/hub-re-drilling-t9243.htm#119921 http://blitzen.editboard.com/technical-q-a-f4/hub-re-drilling-t9243.htm http://blitzen.editboard.com/technical-q-a-f4/roll-cages-t9179.htm WizBizMartin ]]> Technical Q/A Fri, 16 Oct 2009 19:17:59 GMT http://blitzen.editboard.com/technical-q-a-f4/roll-cages-t9179.htm#119118 http://blitzen.editboard.com/technical-q-a-f4/roll-cages-t9179.htm http://blitzen.editboard.com/technical-q-a-f4/pressing-the-brake-increases-the-idle-speedwhy-t9264.htm tango_van
lift foot off break: idles at 900rpm


weird. any ideas.

(have checked none return valve and replace rear vac hoses to engine)]]> Technical Q/A Thu, 22 Oct 2009 21:15:49 GMT http://blitzen.editboard.com/technical-q-a-f4/pressing-the-brake-increases-the-idle-speedwhy-t9264.htm#120072 http://blitzen.editboard.com/technical-q-a-f4/pressing-the-brake-increases-the-idle-speedwhy-t9264.htm http://blitzen.editboard.com/technical-q-a-f4/bolt-on-rocker-covers-t9276.htm Mr Scoops
Am I right in assuming they use the rocker assembly bolts?
Will I need to buy longer bolts?]]> Technical Q/A Sat, 24 Oct 2009 08:23:29 GMT http://blitzen.editboard.com/technical-q-a-f4/bolt-on-rocker-covers-t9276.htm#120204 http://blitzen.editboard.com/technical-q-a-f4/bolt-on-rocker-covers-t9276.htm http://blitzen.editboard.com/technical-q-a-f4/corrado-heater-matrix-t9248.htm griff anyone got acess to etka, have a look for me see if it is the same as a golf one. cheers Technical Q/A Wed, 21 Oct 2009 21:16:26 GMT http://blitzen.editboard.com/technical-q-a-f4/corrado-heater-matrix-t9248.htm#119978 http://blitzen.editboard.com/technical-q-a-f4/corrado-heater-matrix-t9248.htm http://blitzen.editboard.com/technical-q-a-f4/aloys-with-4-x-100-pcd-t9211.htm [STEVIE.G] im after some new wheels for my corrado, ive been told that vauxhall, renault and jap cars like honda have the same 4 x 100 pcd that the corrado has, is there any thing else i need to no cos ive seen some honda wheels that i want? will they bolt straight on?...... Technical Q/A Sun, 18 Oct 2009 19:50:23 GMT http://blitzen.editboard.com/technical-q-a-f4/aloys-with-4-x-100-pcd-t9211.htm#119459 http://blitzen.editboard.com/technical-q-a-f4/aloys-with-4-x-100-pcd-t9211.htm http://blitzen.editboard.com/technical-q-a-f4/tyre-sizes-t9234.htm big dave
Cheers in advance Guys ]]> Technical Q/A Tue, 20 Oct 2009 20:23:13 GMT http://blitzen.editboard.com/technical-q-a-f4/tyre-sizes-t9234.htm#119800 http://blitzen.editboard.com/technical-q-a-f4/tyre-sizes-t9234.htm http://blitzen.editboard.com/technical-q-a-f4/engine-needed-t9192.htm derrickeverard ]]> Technical Q/A Sat, 17 Oct 2009 17:07:28 GMT http://blitzen.editboard.com/technical-q-a-f4/engine-needed-t9192.htm#119218 http://blitzen.editboard.com/technical-q-a-f4/engine-needed-t9192.htm http://blitzen.editboard.com/technical-q-a-f4/engine-help-t4-t9188.htm derrickeverard ]]> Technical Q/A Sat, 17 Oct 2009 11:18:16 GMT http://blitzen.editboard.com/technical-q-a-f4/engine-help-t4-t9188.htm#119182 http://blitzen.editboard.com/technical-q-a-f4/engine-help-t4-t9188.htm http://blitzen.editboard.com/technical-q-a-f4/fuch-s-t9146.htm Sir.Swish I don't suppose anybody knows if these are available in 14"? I'd be very keen on getting myself a set if they do! Technical Q/A Tue, 13 Oct 2009 13:14:58 GMT http://blitzen.editboard.com/technical-q-a-f4/fuch-s-t9146.htm#118807 http://blitzen.editboard.com/technical-q-a-f4/fuch-s-t9146.htm http://blitzen.editboard.com/technical-q-a-f4/will-this-boss-fit-the-splines-on-a-t4-t9117.htm big dave http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=380120873357&ssPageName=STRK:MEWAX:IT

Think it should as mk2 golf but just wanna check before I fork out the dosh]]> Technical Q/A Sun, 11 Oct 2009 09:59:33 GMT http://blitzen.editboard.com/technical-q-a-f4/will-this-boss-fit-the-splines-on-a-t4-t9117.htm#118579 http://blitzen.editboard.com/technical-q-a-f4/will-this-boss-fit-the-splines-on-a-t4-t9117.htm http://blitzen.editboard.com/technical-q-a-f4/scirocco-still-aint-working-t9065.htm urlag im on the verge of giving up on this god damm bloody scirocco!!! please some one help me, i love this car but just cant get the little bitch to work. weve put a golf 1.8 gti engine into her. its had new fuel pump fitted as the golf pump is gravity fed. and ive wired up the warm up sensors now but still getting kangaroo jumping and stalling after about 20 metres. not sure what else to try. the only thing i can think off (but have been told shouldnt make a differents) is to change ... Technical Q/A Tue, 06 Oct 2009 23:11:44 GMT http://blitzen.editboard.com/technical-q-a-f4/scirocco-still-aint-working-t9065.htm#117909 http://blitzen.editboard.com/technical-q-a-f4/scirocco-still-aint-working-t9065.htm http://blitzen.editboard.com/technical-q-a-f4/price-help-carbs-t9077.htm ProjectParsons Que how long is a piece of string... If this needs to be in tech so be it... I was after opinions really though. Im not a twin carb guru - i have always rocked stock. I will be looking to spruce up the bugs performance after its mot... Economy is not my middle name, its not a daily so that is not a priority. Tunability and a bit of nippyness is what im wanting for now. http://www.volkszone.com/VZi/showthread.php?t=592995 Would these be a useable option for the 1600 motor, ... Technical Q/A Wed, 07 Oct 2009 19:38:10 GMT http://blitzen.editboard.com/technical-q-a-f4/price-help-carbs-t9077.htm#118089 http://blitzen.editboard.com/technical-q-a-f4/price-help-carbs-t9077.htm http://blitzen.editboard.com/technical-q-a-f4/need-a-lump-for-the-mk1-t9044.htm snowman Hey guys, I'm stuck, project MK1 is on full steam ahead, but I need help. What engine should I go for, It needs to be quick economical reliable different cool, sound amazing be good on fuel cheap to buy easy to fit and maintain, oh and look shiney under the bonnet! Not asking much am I. Anyway, i'm clueless and going round in circles, please offer ideas, otherwise i might do something stoopid.... Technical Q/A Sun, 04 Oct 2009 21:21:05 GMT http://blitzen.editboard.com/technical-q-a-f4/need-a-lump-for-the-mk1-t9044.htm#117661 http://blitzen.editboard.com/technical-q-a-f4/need-a-lump-for-the-mk1-t9044.htm http://blitzen.editboard.com/technical-q-a-f4/wheels-and-their-width-t9058.htm clockwork



Thinking these are the things I am after but 7J is too fat! What can I do?]]> Technical Q/A Tue, 06 Oct 2009 18:06:01 GMT http://blitzen.editboard.com/technical-q-a-f4/wheels-and-their-width-t9058.htm#117826 http://blitzen.editboard.com/technical-q-a-f4/wheels-and-their-width-t9058.htm http://blitzen.editboard.com/technical-q-a-f4/pertronix-igniton-gapping-between-module-and-magent-collor-t9041.htm WizBizMartin
cheers Everyone

Martin T]]> Technical Q/A Sun, 04 Oct 2009 19:06:23 GMT http://blitzen.editboard.com/technical-q-a-f4/pertronix-igniton-gapping-between-module-and-magent-collor-t9041.htm#117605 http://blitzen.editboard.com/technical-q-a-f4/pertronix-igniton-gapping-between-module-and-magent-collor-t9041.htm http://blitzen.editboard.com/technical-q-a-f4/fao-nomates-t9042.htm WizBizMartin im stumped only place i can think is between the mufflers bits an the t brach coming of the header,


cheers Martin T]]> Technical Q/A Sun, 04 Oct 2009 19:47:24 GMT http://blitzen.editboard.com/technical-q-a-f4/fao-nomates-t9042.htm#117612 http://blitzen.editboard.com/technical-q-a-f4/fao-nomates-t9042.htm http://blitzen.editboard.com/technical-q-a-f4/help-wanted-engine-running-ruff-or-not-at-all-t8894.htm aaron if any one has one, i can collect toight?]]> Technical Q/A Sun, 20 Sep 2009 14:43:24 GMT http://blitzen.editboard.com/technical-q-a-f4/help-wanted-engine-running-ruff-or-not-at-all-t8894.htm#116040 http://blitzen.editboard.com/technical-q-a-f4/help-wanted-engine-running-ruff-or-not-at-all-t8894.htm http://blitzen.editboard.com/technical-q-a-f4/t4-urgent-help-required-t9015.htm type25 dan wondered if anyone who has a manual could have a quick look for me? any help would be apperciated ]]> Technical Q/A Thu, 01 Oct 2009 17:46:35 GMT http://blitzen.editboard.com/technical-q-a-f4/t4-urgent-help-required-t9015.htm#117314 http://blitzen.editboard.com/technical-q-a-f4/t4-urgent-help-required-t9015.htm http://blitzen.editboard.com/technical-q-a-f4/lowering-t8994.htm baja 69 i am thinking about lowering the bay. i am not exactly short but its a pain needing a ladder to get in and out of the thing! lowering the rear is no problem. the dilemma is... do i just buy the front beam adjusters and do it myself or just pay to get it done? i have seen it advertised at £300 and done in a day. has anyone fitted the adjusters? does the beam need to come out or can they be fitted in situ? i dont really want to buy a new beam i dont want it in the weeds as i want to ... Technical Q/A Mon, 28 Sep 2009 21:34:03 GMT http://blitzen.editboard.com/technical-q-a-f4/lowering-t8994.htm#117093 http://blitzen.editboard.com/technical-q-a-f4/lowering-t8994.htm http://blitzen.editboard.com/technical-q-a-f4/fuel-tank-breathers-t9000.htm baja 69
where should they go? all i have is 2 open pipes on either side of the engine bay. its a 2000cc CJ0 motor.
i have checked that they are intact to the tank and they seem to be ok]]> Technical Q/A Tue, 29 Sep 2009 13:54:39 GMT http://blitzen.editboard.com/technical-q-a-f4/fuel-tank-breathers-t9000.htm#117142 http://blitzen.editboard.com/technical-q-a-f4/fuel-tank-breathers-t9000.htm http://blitzen.editboard.com/technical-q-a-f4/front-end-noises-t8990.htm Meester Teem Whenever my Bay goes over a bump or hole in the road there's a troubling metallic knock from the front nearside suspension. Any ideas as to what could be causing it? Technical Q/A Mon, 28 Sep 2009 20:00:01 GMT http://blitzen.editboard.com/technical-q-a-f4/front-end-noises-t8990.htm#117059 http://blitzen.editboard.com/technical-q-a-f4/front-end-noises-t8990.htm http://blitzen.editboard.com/technical-q-a-f4/welding-advicehelp-t8354.htm ARCANE Can anyone advise me on a good welder and auto dark mask sutable for use on VW`s we had a bash with our MIG today but where as its great for welding farm equipment it just blew holes in the thin gauge of steel used on bugs even on its lowest setting also what size wire is best we were using 0.6 as this was all we had...any help and advice on this subject would be really appreciated. Technical Q/A Sun, 02 Aug 2009 18:13:54 GMT http://blitzen.editboard.com/technical-q-a-f4/welding-advicehelp-t8354.htm#109784 http://blitzen.editboard.com/technical-q-a-f4/welding-advicehelp-t8354.htm http://blitzen.editboard.com/technical-q-a-f4/steering-wheel-q-t8897.htm ProjectParsons Are mountney and astrali steering wheels interchangable? Technical Q/A Sun, 20 Sep 2009 16:38:01 GMT http://blitzen.editboard.com/technical-q-a-f4/steering-wheel-q-t8897.htm#116087 http://blitzen.editboard.com/technical-q-a-f4/steering-wheel-q-t8897.htm http://blitzen.editboard.com/technical-q-a-f4/has-anyone-ever-tryed-roll-the-arch-on-a-bug-wings-using-t8983.htm WizBizMartin http://www.frost.co.uk/item_Detail.asp?productID=9108&frostProductName=Wheel+Arch+Roller+&catID=13&subCatID=19&FrostCat=Bodywork&FrostSubcat=Machines


just thinking mabey for some extra tyre clearence,, wont this damge the wing ?]]> Technical Q/A Sun, 27 Sep 2009 19:49:38 GMT http://blitzen.editboard.com/technical-q-a-f4/has-anyone-ever-tryed-roll-the-arch-on-a-bug-wings-using-t8983.htm#116939 http://blitzen.editboard.com/technical-q-a-f4/has-anyone-ever-tryed-roll-the-arch-on-a-bug-wings-using-t8983.htm http://blitzen.editboard.com/technical-q-a-f4/por-15-t8969.htm ARCANE ]]> Technical Q/A Sat, 26 Sep 2009 13:01:30 GMT http://blitzen.editboard.com/technical-q-a-f4/por-15-t8969.htm#116849 http://blitzen.editboard.com/technical-q-a-f4/por-15-t8969.htm http://blitzen.editboard.com/technical-q-a-f4/weird-pop-cough-in-the-carb-t8937.htm tango_van So.... Engine has done approx 1800-2000 miles now since new. Been set up on rolling road at 400miles (carb prob all sorted etc) and tuned for running in. it took me around France/Cornwall and to bristol and back loads for work, with no problems. this week it's began to run rough..... idle speed dropping from 900rpm to 500rpm and sometimes cutting out. (sorted ish by a turn on both carbs idle speed/throttle screw) it also makes a cough/spitting/pop in the right hand ... Technical Q/A Wed, 23 Sep 2009 19:44:00 GMT http://blitzen.editboard.com/technical-q-a-f4/weird-pop-cough-in-the-carb-t8937.htm#116581 http://blitzen.editboard.com/technical-q-a-f4/weird-pop-cough-in-the-carb-t8937.htm http://blitzen.editboard.com/technical-q-a-f4/dizzy-troubles-t8903.htm aaron ]]> Technical Q/A Sun, 20 Sep 2009 21:37:20 GMT http://blitzen.editboard.com/technical-q-a-f4/dizzy-troubles-t8903.htm#116177 http://blitzen.editboard.com/technical-q-a-f4/dizzy-troubles-t8903.htm http://blitzen.editboard.com/technical-q-a-f4/tools-t8822.htm clockwork I'm starting from scratch again with an empty toolbox and need to get started, I need tools! I don't really have the cash to throw at a complete snap-on set so need a foundation set to get started. I saw this one on eBay and wondered if it's a half decent set, good start? If you have any ideas for alternatives. I have completely no idea so need some help here dudes... http://cgi.ebay.co.uk/CRESCENT-211-pc-PRO-MECHANICS-TOOL-SET-SOCKETS-SPANNERS_W0QQitemZ310167206098QQcmdZViewItemQQptZUK_Hand_Tools_Equipment?hash=item483767f8d2&_trksid=p3286.c0.m14 Technical Q/A Mon, 14 Sep 2009 21:38:29 GMT http://blitzen.editboard.com/technical-q-a-f4/tools-t8822.htm#115466 http://blitzen.editboard.com/technical-q-a-f4/tools-t8822.htm http://blitzen.editboard.com/technical-q-a-f4/fao-rich-delboy-anyone-who-knows-about-t4s-t8745.htm type25 dan ]]> Technical Q/A Sun, 06 Sep 2009 21:32:41 GMT http://blitzen.editboard.com/technical-q-a-f4/fao-rich-delboy-anyone-who-knows-about-t4s-t8745.htm#114612 http://blitzen.editboard.com/technical-q-a-f4/fao-rich-delboy-anyone-who-knows-about-t4s-t8745.htm http://blitzen.editboard.com/technical-q-a-f4/urgent-rivit-t8805.htm WizBizMartin does anyone hae a rivet gun and 2 rivets that i can borrow, thing is i need to re revit the locking bit on a a bug quaterlight window, hard to explain , basically the lock on my 1/4 light window broke so i need to buy a new one , thats fine but the lock is riveted into the 1/4 light, frame, so if anyone has a rivet gun and a 2 rivits the corect size for the lock thing that would be great as need to get this sorted by friday it would be a massive help, cheers All this is what im replacing, ... Technical Q/A Sun, 13 Sep 2009 21:11:08 GMT http://blitzen.editboard.com/technical-q-a-f4/urgent-rivit-t8805.htm#115311 http://blitzen.editboard.com/technical-q-a-f4/urgent-rivit-t8805.htm http://blitzen.editboard.com/technical-q-a-f4/some-input-needed-t8764.htm big dave Been considering different options on my rear lights Been thinking about frenched lights for that proper custom touch using these units which come in red and clear as well What you guys recon and any input as to any legality issues would be cool Technical Q/A Tue, 08 Sep 2009 20:31:19 GMT http://blitzen.editboard.com/technical-q-a-f4/some-input-needed-t8764.htm#114874 http://blitzen.editboard.com/technical-q-a-f4/some-input-needed-t8764.htm http://blitzen.editboard.com/technical-q-a-f4/jetting-big-al-t8722.htm WizBizMartin using Als tuning book i ahve come to the following equation for jetting, 1914cc / 4 = 478.5 using 34 vents would give me a peak at 5400 ish so wondering weather to stick 36s in ? for the moment though 34 vents means i need 136 main , round it up to 140 to be on the safe side, and then change the idles to 60's 34 vents 140 mains 60 idle .1 emul 35 pump 180 air corrector, with 36 vents it would peak at 6000rpm but with the bigger vent come bigger main so worried about ... Technical Q/A Sat, 05 Sep 2009 00:13:32 GMT http://blitzen.editboard.com/technical-q-a-f4/jetting-big-al-t8722.htm#114234 http://blitzen.editboard.com/technical-q-a-f4/jetting-big-al-t8722.htm http://blitzen.editboard.com/technical-q-a-f4/how-does-this-look-t8653.htm clockwork




]]> Technical Q/A Mon, 31 Aug 2009 22:51:46 GMT http://blitzen.editboard.com/technical-q-a-f4/how-does-this-look-t8653.htm#113308 http://blitzen.editboard.com/technical-q-a-f4/how-does-this-look-t8653.htm http://blitzen.editboard.com/technical-q-a-f4/t4-caavelle-rear-windows-t8728.htm big dave Does anybody know if these are bonded in or if they are just fitted in rubbers? Technical Q/A Sat, 05 Sep 2009 19:43:53 GMT http://blitzen.editboard.com/technical-q-a-f4/t4-caavelle-rear-windows-t8728.htm#114287 http://blitzen.editboard.com/technical-q-a-f4/t4-caavelle-rear-windows-t8728.htm http://blitzen.editboard.com/technical-q-a-f4/wheel-polishing-t8724.htm nomates

cheers boys and girls ]]> Technical Q/A Sat, 05 Sep 2009 16:25:18 GMT http://blitzen.editboard.com/technical-q-a-f4/wheel-polishing-t8724.htm#114263 http://blitzen.editboard.com/technical-q-a-f4/wheel-polishing-t8724.htm http://blitzen.editboard.com/technical-q-a-f4/valve-size-identification-t8716.htm WizBizMartin ,]]> Technical Q/A Fri, 04 Sep 2009 18:22:17 GMT http://blitzen.editboard.com/technical-q-a-f4/valve-size-identification-t8716.htm#114178 http://blitzen.editboard.com/technical-q-a-f4/valve-size-identification-t8716.htm http://blitzen.editboard.com/technical-q-a-f4/help-with-golf-mk2-wiring-t8696.htm Anonymous hi there, myself and kev banwell have been putting a golf gti engine in my scirocco and have now nearly finished (hopefuly). weve came across one problem now. i need to now where the wires go from the blue plug on the inlet manifold and the brown plug on the front of the block. (warm up valve). The other end in the car is a dual connector that holds all 3 wires but i can't see where they are meant to go. ive got pictures but it wont let me post them. there on my facebook page search ... Technical Q/A Thu, 03 Sep 2009 15:05:09 GMT http://blitzen.editboard.com/technical-q-a-f4/help-with-golf-mk2-wiring-t8696.htm#113931 http://blitzen.editboard.com/technical-q-a-f4/help-with-golf-mk2-wiring-t8696.htm http://blitzen.editboard.com/technical-q-a-f4/ps-to-bhp-figures-t8680.htm nomates

cheers]]> Technical Q/A Wed, 02 Sep 2009 16:43:34 GMT http://blitzen.editboard.com/technical-q-a-f4/ps-to-bhp-figures-t8680.htm#113646 http://blitzen.editboard.com/technical-q-a-f4/ps-to-bhp-figures-t8680.htm http://blitzen.editboard.com/technical-q-a-f4/brake-bleeding-with-abs-t8625.htm Impy Mcdub evenin all......question: the sharan failed the ticket a few days ago on the rear brake caliper on the passenger side rear......no movement in the handbrake & zilch free movement at the piston.......no alternative...new caliper (a very reasonable £60 new) Ive just fitted the new caliper without too much grief BUT.....having only lost the minimum of brake fluid when swapping the pipework over, i cant get it to bleed. Using the old "push down.....let back" while i clamped ... Technical Q/A Sat, 29 Aug 2009 17:21:30 GMT http://blitzen.editboard.com/technical-q-a-f4/brake-bleeding-with-abs-t8625.htm#112833 http://blitzen.editboard.com/technical-q-a-f4/brake-bleeding-with-abs-t8625.htm